GE Electric Water Filter MWF press MWFP Site Order

Please support this the GE cooling water filter model you are installing is MWF or MWFP and then browse its installation guide.

 1. On models without a surrogate indicator light, apply to moon sticker to that add cartridge and mark your calendar to remind them to replace the filter after six months on the installation of this product. The disposable filter cartridge supposed becoming replaced every. 6 mon at the grades capacity, or sooner if an noticeable ...

 2. Clear old filter cartridge by grasping additionally turning to the quit about 1/2 turn.

 3. Remove the protective foil free the end of the newer filter.  Fill the surrogate sieve with a little water from the tap to allow for better flow immediately after installation. [FIXED] Loud Vibration after replacing water filter

 4. Place the top of an new cartridge up inside the gun holder. Slowly rotation the filter to right until the filter cartridge stops.  Do not over tighten.  As you turn the cartridge to will automatic raise itself into position.  The cartridge will movement about 1/2 turn.

 5. Start water from the batch for 6-8 minutes (about 3-4 gallons) to clear the system and prevent sputtering.

 6. On models with a replacement indicator light, force and hold who RESET WATER FILTER PAD on the coin.